Pular para o conteúdo
We are climate neutral since 2010

Sensor de ângulo 424D

Disponível no elostore

Sensor de ângulo 424D

Disponível no elostore
  • Durabilidade e confiabilidade de medição devido à tecnologia de sensores de efeito Hall
  • Range de medição de 20° até 360°
  • Classe de proteção IP67
  • Temperatura de trabalho -40 °C até +85 °C
  • Resolução 12 bits
  • Sinal de saída em tensão ou corrente
  • Disponível com um ou dois sinais de saída
  • Sinal de saída PWM sob consulta
  • Sem limite mecânico de travamento
  • À prova de curto-circuito
  • Material da carcaça: PBT

O sensor de ângulo modelo 424D tem range de medição de 20° até 360°. Devido à tecnologia de sensores de efeito Hall, é um produto extremamente confiável e com elevada vida útil.

Os sensores de ângulo 424D são aplicados, por exemplo, em pedais de aceleração em equipamentos móbil ou controlar a posição em guindastes. Devido à seu design robusto, o sensor 424D é ideal para aplicação em escavadeiras, robôs ou turbinas eólicas.

Este produto também está disponível em nossa elo.store.

Desenho técnico

1/2
424D_technical_dr_01
Tela cheia
1/2
2/2
424D_technical_dr_02
Tela cheia
2/2

Características do artigo

  • 424D.1...
  • 424D.7...
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal min.
  • Output signal max.
  • Output signal - centre position/zero position
  • Output signal - centre position/zero position
  • Resolution
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Load resistance max.
  • Linearity error
  • Signal sequence
  • Signal update rate
  • Outputs (quantity, type)
  • Technology
  • Angle measuring range
  • Outputs
  • MTTF
  • Temperature coefficient
  • EMC Agricultural and forestry machines (Norm)
  • EMC Earth-moving and building construction machinery (Norm)
  • EMC Industrial trucks (Norm)
  • Max. shaft load, axial
  • Max. shaft load, radial
  • Mechanical stop
  • Actuating lever
  • Protection class
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Torque for fastening screws
  • Connector type
Attribute424D.1...424D.7...
Bestellung
Bestellung
Polarity reversal protection yes
Output signal min. 0.5 V DC
Output signal max. 4.5 V DC
Output signal min. 4 mA
Output signal max. 20 mA
Output signal - centre position/zero position 2.5 V DC
Output signal - centre position/zero position 12 mA
Resolution 0.09 °
Operating voltage min. 10 V DC
Operating voltage max. 30 V DC
Current consumption 30 mA
Load resistance min. 100000 Ohm
Load resistance max. 200 Ohm
Linearity error < ±1 % < ± 1 %
Signal sequence CCW or CW/CCW
Signal update rate 1600 Hz
Outputs (quantity, type) 1 or 2
Technology Hall
Angle measuring range 20°...360 °
Outputs 4...20mA 0,5...4,5V
MTTF 79.6 a 115.9 a
Temperature coefficient < ±1.2 %
EMC Agricultural and forestry machines (Norm) EN ISO 14982
pulse 5b: max. voltage 35V (absolute), functional status C for pulse 1 and 4
EMC Earth-moving and building construction machinery (Norm) DIN EN ISO 13766-1
pulse "load dump": max. voltage 35V (absolute)
EMC Industrial trucks (Norm) DIN EN 12895
Max. shaft load, axial 50 N
Max. shaft load, radial 100 N
Mechanical stop no
Actuating lever Selectable
Protection class IP67 DIN EN 60529
Operating temperature min. -40 °C
Max. operating temperature 85 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
Torque for fastening screws 2.5 N m
Connector type Deutsch DT04-6P
1/1
Sensor de ângulo 424D - elobau
Tela cheia
1/1

Avaliações de clientes

Produto adicionado à lista de referência.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
Todos os campos marcados com * são obrigatórios.