Sensor de ângulo 424S

Durabilidade e confiabilidade de medição devido à tecnologia de sensores de efeito Hall
Classe de proteção IP67
Temperatura de trabalho -40 °C até +85 °C
Resolução 0.1°
Sinal de saída em tensão ou corrente
Sinal de saída digital (push-pull / high-side / low-side) até 1.5A
Conector AMP (Micro Quadlock) ou Deutsch DT04-6P

O sensor de ângulo modelo 424S tem sinal de saída redundante, portanto é adequado para aplicações que exijam maior grau de segurança. O sensor tem um range de medição de 30° até 120°. Confiabilidade de medição e uma elevada vida útil ao produto devido à tecnologia de sensores de efeito Hall. O sensor pode ser usado em manipuladores telescópicos, plataformas elevatórias, veículos fora de estrada, entre outros.

View my requests

Baixar tudo

Características do artigo

424SD11D....
424SD16D....
424SD17D....

Polarity reversal protection
Output signal min.
Output signal max.
Output signal min.
Output signal max.
Output signal - centre position/zero position
Output signal - centre position/zero position
Output signal - switching point
Resolution
EMC Agricultural and forestry machines (Norm)
EMC Earth-moving and building construction machinery (Norm)
EMC Industrial trucks (Norm)
Operating voltage min.
Operating voltage max.
Max. overvoltage
Current consumption
Load resistance min.
Load resistance max.
Temperature coefficient
Typical linearity error
Signal sequence
Signal update rate
Outputs (quantity, type)
Max. switching current
Technology
Angle measuring range - analogue output
Angle range - switching output
Outputs
MTTF
Max. shaft load, axial
Max. shaft load, radial
Bearing
Mechanical stop
Actuating lever
Protection class
Operating temperature min.
Max. operating temperature
Min. storage temperature
Max. storage temperature
Torque for fastening screws
Connector type

Attribute	424SD11D....	424SD16D....	424SD17D....
Bestellung
Bestellung
Polarity reversal protection	yes
Output signal min.	–	0.5 V DC
Output signal max.	–	4.5 V DC
Output signal min.	4 mA	–
Output signal max.	20 mA	–
Output signal - centre position/zero position	–	2.5 V DC
Output signal - centre position/zero position	12 mA	–
Output signal - switching point	Selectable (Highside, Lowside, Push-Pull)
Resolution	0.1 °
EMC Agricultural and forestry machines (Norm)	EN ISO 14982 pulse 5b: max. voltage 54V (absolute), functional status C for pulse 1 and 4	EN ISO 14982 conducted disturbance not applicable for 5V supply	EN ISO 14982 pulse 5b: max. voltage 54V (absolute), functional status C for pulse 1 and 4
EMC Earth-moving and building construction machinery (Norm)	DIN EN ISO 13766-1 pulse "load dump": max. voltage 54V (absolute)	DIN EN ISO 13766-1 conducted disturbance not applicable for 5V supply	DIN EN ISO 13766-1 pulse "load dump": max. voltage 54V (absolute)
EMC Industrial trucks (Norm)	DIN EN 12895
Operating voltage min.	9 V DC	4.5 V DC	9 V DC
Operating voltage max.	32 V DC	5.5 V DC	32 V DC
Max. overvoltage	(5min @ 25°C) 36 V DC	5.5 V DC	(5min @ 25°C) 36 V DC
Current consumption	424SD11D.: 17.00 mA 424SD1.DH: 9.00 mA 424SD1.DL: 15.00 mA 424SD1.DS: 15.00 mA	424SD16D.: 9.00 mA 424SD1.DH: 9.00 mA 424SD1.DL: 15.00 mA 424SD1.DS: 15.00 mA	424SD17D.: 17.00 mA 424SD1.DH: 9.00 mA 424SD1.DL: 15.00 mA 424SD1.DS: 15.00 mA
Load resistance min.	–	20000 Ohm	10000 Ohm
Load resistance max.	9V: <150 Ohm > 12V: <350 Ohm	–
Temperature coefficient	typ. +- 250 ppm/K
Typical linearity error	<= ±15°:±0,2° <= ±25°:±0,4° <= ±35°:±1,0° <= ±45°:±2,0° <= ±60°:±5,0°
Signal sequence	CCW (CW on request)
Signal update rate	2000 Hz
Outputs (quantity, type)	2
Max. switching current	Highside / Lowside: 1500 mA Push-Pull: 0,25 mA
Technology	Hall
Angle measuring range - analogue output	30° - 120° (selectable in 5° increments)
Angle range - switching output	0° - 120° (Selectable in 5° increments)
Outputs	4…20mA + switching output	0,5…4,5V ratiometric + Switching output	0,5...4,5V + Switching output
MTTF	424SD11D.: 72.2 a 424SD1.DH: 78.4 a 424SD1.DL: 87.1 a 424SD1.DS: 113.0 a	424SD16D.: 111.9 a 424SD1.DH: 78.4 a 424SD1.DL: 87.1 a 424SD1.DS: 113.0 a	424SD17D.: 79.6 a 424SD1.DH: 78.4 a 424SD1.DL: 87.1 a 424SD1.DS: 113.0 a
Max. shaft load, axial	50 N
Max. shaft load, radial	100 N
Bearing	Ball bearing
Mechanical stop	Optional
Actuating lever	Optional (Accessories: 350210)
Protection class	IP67 DIN EN 60529 / IPX9K ISO 20653
Operating temperature min.	-40 °C
Max. operating temperature	85 °C
Min. storage temperature	-40 °C
Max. storage temperature	105 °C
Torque for fastening screws	2.5 N m
Connector type	Deutsch DT04-6P