Pular para o conteúdo
We are climate neutral since 2010

Sensor ultrassônico M30 – comunicação IO-Link

Sensor ultrassônico M30 – comunicação IO-Link

  • Alta precisão independente da superfície à ser medida ser transparente, brilhante ou colorida
  • Resistente à contaminação, umidade e poeira
  • Carcaça em ano inox (DIN 1.4404) ou plástico (PBT)
  • Range de medição até 6 m
  • Sinal de saída digital NPN/PNP/Push-Pull, saída analógica
  • Parametrização via comunicação IO-Link ou acesso ao menu via botão montado no sensor
  • 4 modos de operação: retro reflexivo, janela, histerese e pontos de comutação
  • Sincronização e operação multiplex
  • Compensação de temperatura

A família de sensores ultrassônicos modelo U*30 é ideal para detecção de objetos e medição de nível até 8 metros. Os sensor ultrassônicos U*30 possui sistema de compensação de temperatura proporcionando precisão mesmo em aplicações com grandes oscilações de temperatura.

Disponível em carcaças de aço inox ou plástico, esta família de sensores oferece flexibilidade de aplicação.

Desenho técnico

1/5
CAT_SENS_U_30_Standard_DRW
Tela cheia
1/5
2/5
CAT_SENS_U_30_Standard_CON
Tela cheia
2/5
3/5
CAT_SENS_U_30_Large_DRW
Tela cheia
3/5
4/5
CAT_SENS_U_30_Standard_CON
Tela cheia
4/5
5/5
CAT_SENS_U_30_Standard_CD_IO
Tela cheia
5/5

Características do artigo

  • UC30LPIC600S
  • UC30LPIN600S
  • UC30LPIP600S
  • UC30LPIV600S
  • UC30MIC350S
  • UC30MIN350S
  • UC30MIP350S
  • UC30MIV350S
  • UC30PIC350S
  • UC30PIN350S
  • UC30PIP350S
  • UC30PIV350S
  • UC30XSIC800S
  • UC30XSIN800S
  • UC30XSIP800S
  • UC30XSIV800S
  • Continuous current
  • Switching frequency
  • Polarity reversal protection
  • Switching output
  • Output signal min.
  • Output signal max.
  • Output signal min.
  • Output signal max.
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Load resistance max.
  • Technology
  • Operating frequency
  • Outputs
  • Operating Mode
  • Sensing range
  • Opening angle of sound cone
  • Ripple
  • Repeating accuracy
  • Resolution
  • Thermal drift
  • Overload protection
  • Short-circuit protection
  • Synchronization
  • Multiplexing
  • Linearity error
  • IO-Link
  • Minimum distance object/reflector (retro-reflective sensor)
  • Blind zone
  • Start-up time digital output
  • EMC
  • Minimum distance sensor/reflector (retro-reflective sensor)
  • Start-up time analogue output
  • MTTF
  • Response time analogue output
  • Accessories supplied
  • Controls
  • Indicators
  • Application specific
  • Dimensions
  • Housing design
  • Housing material
  • Material sound transducer
  • Protection class
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Temperature compensation
  • Thread
  • Torque
  • Weight
  • Connector type
  • CE label
  • UL certification
  • CCC certification
  • SIO mode
  • Cycle time
  • Process data width
  • IO-Link version
  • Master port class
  • Transmission rate
AttributeUC30LPIC600SUC30LPIN600SUC30LPIP600SUC30LPIV600SUC30MIC350SUC30MIN350SUC30MIP350SUC30MIV350SUC30PIC350SUC30PIN350SUC30PIP350SUC30PIV350SUC30XSIC800SUC30XSIN800SUC30XSIP800SUC30XSIV800S
Bestellung
Bestellung
Continuous current 0.1 A 0.1 A 0.1 A
Switching frequency 1 Hz 1 Hz 1 Hz
Polarity reversal protection yes yes yes
Switching output Push-Pull Push-Pull+NPN Push-Pull+PNP Push-Pull Push-Pull+NPN Push-Pull+PNP Push-Pull Push-Pull+NPN Push-Pull+PNP Push-Pull Push-Pull+NPN Push-Pull+PNP Push-Pull
Output signal min. 0 V DC 0 V DC 0 V DC 0 V DC
Output signal max. 10 V DC 10 V DC 10 V DC 10 V DC
Output signal min. 4 mA 4 mA 4 mA 4 mA
Output signal max. 20 mA 20 mA 20 mA 20 mA
Operating voltage min. 10 V DC 10 V DC 10 V DC
Operating voltage max. 30 V DC 30 V DC 30 V DC
Current consumption < 30 mA < 30 mA < 30 mA
Load resistance min. 3000 Ohm 3000 Ohm 3000 Ohm 3000 Ohm
Load resistance max. 500 Ohm 500 Ohm 500 Ohm 500 Ohm
Technology Ultrasonic Ultrasonic Ultrasonic
Operating frequency 75 kHz 112 kHz 112 kHz 40 kHz
Outputs 1x Push-Pull (IO-Link) + 1x 4...20mA 1x Push-Pull (IO-Link) + 1x NPN 1x Push-Pull (IO-Link) + 1x PNP 1x Push-Pull (IO-Link) + 1x 0...10V 1x Push-Pull (IO-Link) + 1x 4...20mA 1x Push-Pull (IO-Link) + 1x NPN 1x Push-Pull (IO-Link) + 1x PNP 1x Push-Pull (IO-Link) + 1x 0...10V 1x Push-Pull (IO-Link) + 1x 4...20mA 1x Push-Pull (IO-Link) + 1x NPN 1x Push-Pull (IO-Link) + 1x PNP 1x Push-Pull (IO-Link) + 1x 0...10V 1x Push-Pull (IO-Link) + 1x 4...20mA 1x Push-Pull (IO-Link) + 1x NPN 1x Push-Pull (IO-Link) + 1x PNP 1x Push-Pull (IO-Link) + 1x 0...10V
Operating Mode diffuse reflection sensor/retro-reflective sensor diffuse reflection sensor/retro-reflective sensor diffuse reflection sensor/retro-reflective sensor
Sensing range 350...6000 mm 250...3500 mm 250...3500 mm 600...8000 mm
Opening angle of sound cone 18 ±2 ° 15 ±2 ° 15 ±2 ° 15 ±1 °
Ripple 5 % 5 % 5 %
Repeating accuracy 0.1 % 0.1 % 0.1 %
Resolution 6 mm 3 mm 3 mm 8 mm
Thermal drift ±5 % ±5 % ±5 %
Overload protection yes yes yes
Short-circuit protection yes yes yes
Synchronization yes yes yes
Multiplexing no no no
Linearity error 1 % 1 % 1 %
IO-Link yes yes yes
Minimum distance object/reflector (retro-reflective sensor) 10 % 10 % 10 %
Blind zone 350 mm 250 mm 250 mm 600 mm
Start-up time digital output 600 ms 600 ms 1000 ms
EMC EN 60947-5-2 EN 60947-5-2 EN 60947-5-2
Minimum distance sensor/reflector (retro-reflective sensor) 500 mm 300 mm 300 mm 800 mm
Start-up time analogue output 600 ms 600 ms 600 ms 600 ms 900 ms 900 ms
MTTF 100 a 100 a 106 a 100 a
Response time analogue output 450 ms 450 ms 450 ms 450 ms 450 ms
Accessories supplied 2 plastic nuts SW36 + 2 rubber washers 2 stainless steel nuts SW36 2 plastic nuts SW36 + 2 rubber washers 2 stainless steel nuts SW36
Controls Teach-in button/IO-Link Teach-in button/IO-Link Teach-in button/IO-Link
Indicators Switching state: 2 LEDs yellow, Echo: 1 LED green Switching state: 2 LEDs yellow, Echo: 1 LED green Switching state: 2 LEDs yellow, Echo: 1 LED green
Application specific IO-Link IO-Link IO-Link
Dimensions M30x1.5 (head Ø=38.8mm) L=98.6mm M30x1.5 L=98,9 M30x1.5 L=98,9 M30x1.5 (head Ø=61mm) L=115mm
Housing design cylindrical cylindrical cylindrical
Housing material PBT stainless steel 1.4404 PBT DIN 1.4404 + PBT DIN 1.4404 + PBT DIN 1.4404 + PBT
Material sound transducer Epoxy resin with glass balls Epoxy resin with glass balls Epoxy resin with glass balls
Protection class IP67 DIN EN 60529 IP67 DIN EN 60529 IP67 DIN EN 60529
Operating temperature min. -20 °C -20 °C -20 °C
Max. operating temperature 70 °C 70 °C 70 °C
Min. storage temperature -30 °C -30 °C -30 °C
Max. storage temperature 80 °C 80 °C 80 °C
Temperature compensation yes yes yes
Thread M30 M30 M30
Torque 1.5 N m 50 N m 1.5 N m 100 N m
Weight 170 g 215 g 140 g 350 g
Connector type M12 5-pol. M12 5-pol. M12 5-pol.
CE label yes yes yes
UL certification yes yes yes
CCC certification <36V yes <36V yes <36V yes
SIO mode yes yes yes
Cycle time 3,2 ms 3,2 ms 3,2 ms
Process data width 32 bit 32 bit 32 bit
IO-Link version 1.1 1.1 1.1
Master port class Port class A Port class A Port class A
Transmission rate 38400 38400 38400
1/1
U30_IO_ordering-key
Tela cheia
1/1
Downloads
Sensores ultra-sônicos Folheto do produto pdf 1,53 MB

Avaliações de clientes

Produto adicionado à lista de referência.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
Todos os campos marcados com * são obrigatórios.