Pular para o conteúdo
We are climate neutral since 2010

Base de joystick J4

Base de joystick J4

  • Instalação por cima do painel
  • Design compacto
  • Alta confiabilidade e vida útil devido à tecnologia de sensores de efeito Hall e Reed
  • Disponível com diferentes sinais de saída: analógico, redundante, CAN bus  (CANopen/SAEJ1939) ou sinais de saída digitais
  • Classe de proteção IP67, o que permite trabalhar com este joystick também em condições ambientais severas
  • Alavanca com ângulo de atuação de ±20°
  • Diversas opções de atuação: sem-detente, com detente nos finais de curso, com trava por fricção ou travamento da posição central, qualquer função pode ser operada de forma otimizada
  • Desenvolvido para suportar elevadas forças de atuação (eixo x-/y: 2000 N, eixo z: 700 N com comprimento de alavanca de 190mm cada)

Design robusto, montagem por cima do painel

O joystick J4 é ideal para aplicações bastante exigentes e com uso de alta frequência.. Esta base de joystick foi desenvolvida para aplicação em equipamentos móbil pesados como operar caçambas de pá-carregadeiras.

Desenho técnico

1/3
J4_Joystick_Technik
Tela cheia
1/3
2/3
J4_electrical_drawing
Tela cheia
2/3
3/3
J4_options
Tela cheia
3/3

Características do artigo

  • J4A6...
  • J4C6...CANopen
  • J4C6...SAE_J1939
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal
  • Output signal - centre position/zero position
  • EMC immunity (Norm)
  • EMC emission (Norm)
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Short-circuit resistance to GND
  • Short-circuit resistance to supply
  • Technology
  • Protocol
  • Transmitting cycle
  • Baud rate
  • Bus terminating resistor
  • Max. lever load with specified lever length
  • Deflection
  • Service life, mechanical (Cycles)
  • Protection class, electronic
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Installation
  • Mounting type
  • Connector type
  • Cable type
  • Cable length
AttributeJ4A6...J4C6...CANopenJ4C6...SAE_J1939
Bestellung
Polarity reversal protection yes
Output signal min. 0.5 V DC
Output signal max. 4.5 V DC
Output signal analogue
Output signal - centre position/zero position 2.5 V DC
EMC immunity (Norm) DIN EN 13309, DIN EN ISO 14982
EMC emission (Norm) DIN EN 13309, DIN EN ISO 14982
Operating voltage min. 4.5 V DC 9 V DC
Operating voltage max. 5.5 V DC 36 V DC
Current consumption max. 15 mA < 120 mA
Load resistance min. 20000 Ohm
Short-circuit resistance to GND yes
Short-circuit resistance to supply yes
Technology Hall
Protocol CANopen J1939
Transmitting cycle 100 ms
Baud rate 250 kBit/s
Bus terminating resistor no
Max. lever load with specified lever length 190 mm / 2000 N
Deflection ± 20 °
Service life, mechanical (Cycles) 2000000
Protection class, electronic IP67 DIN EN 60529
Operating temperature min. -25 °C
Max. operating temperature 85 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
Installation from above
Mounting type screwed from above
Connector type Mini-Fit Jr.
Cable type FLRY
Cable length 0.3 m

Avaliações de clientes

Produto adicionado à lista de referência.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
Todos os campos marcados com * são obrigatórios.