Skip to content
Climate neutral since 2010

Robust Joystick J7 Base

Robust Joystick J7 Base

  • Developed for adverse environmental conditions, IP67 protection class (electronics)
  • For forces up to 1000 N in x and y direction
  • Space-saving design allows ergonomic arrangement in armrests
  • High reliability thanks to shielded, contactless Hall technology
  • Friction brake, overpressure points and no-detent actuation enables the operation of various functions

Robust joystick J7 was developed primarily for installation in the armrests of mobile machinery. The design combines a high level of robustness, safety and reliability in a compact space. It is ideally suited for high load and high use applications.

 

Technical drawing

1/4
J7
Full screen
1/4
2/4
J7_mounting
Full screen
2/4
3/4
J7_electrical_drawing
Full screen
3/4
4/4
J7_options
Full screen
4/4

Article characteristics

  • J7A6...
  • J7CJ...
  • J7CO...
  • J7H6...
  • J7R6...
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal
  • Output signal - centre position/zero position
  • Output polarity
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Short-circuit resistance to GND
  • Short-circuit resistance to supply
  • Technology
  • Protocol
  • Node ID / Source Address
  • Transmitting cycle
  • Baud rate
  • Bus terminating resistor
  • Max. lever load with specified lever length
  • Deflection
  • Service life, mechanical (Cycles)
  • Gaiter material
  • Protection class, electronic
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Installation
  • Mounting type
  • Connector type
  • Cable type
  • Cable length
AttributeJ7A6...J7CJ...J7CO...J7H6...J7R6...
Bestellung
Polarity reversal protection yes
Output signal min. 0.5 V DC 0.5 V DC
Output signal max. 4.5 V DC 4.5 V DC
Output signal analogue analogue
Output signal - centre position/zero position 2.5 V DC 2.5 V DC
Output polarity opposite
Operating voltage min. 4.5 V DC 9 V DC 4.5 V DC
Operating voltage max. 5.5 V DC 36 V DC 5.5 V DC
Current consumption max. 15 mA < 120 mA per Signal max. 15 mA
Load resistance min. 20000 Ohm 20000 Ohm
Short-circuit resistance to GND yes
Short-circuit resistance to supply yes
Technology Hall
Protocol J1939 CANopen
Node ID / Source Address 0x70 0x11
Transmitting cycle 100 ms
Baud rate 250 kBit/s
Bus terminating resistor no
Max. lever load with specified lever length 112 mm / 1000 N
Deflection ± 25 °
Service life, mechanical (Cycles) 4000000
Gaiter material CR
Protection class, electronic IP67 DIN EN 60529
Operating temperature min. -20 °C -25 °C -20 °C
Max. operating temperature 85 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
Installation from below
Mounting type screwed from above
Connector type Mini-Fit Jr.
Cable type FLRY
Cable length 0.3 m
Operating instructions and product information
Manual robust joystick J7 pdf 1.37 MB

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.

SPS 2024 – Smart Production Solutions

00
Days
00
Hours
00
minutes
00
Seconds