Skip to content
Climate neutral since 2010

Safety interlock ZD

Rate this product

Safety interlock ZD

Rate this product
  • 7 possible approach directions on each side of the actuator head
  • Supporting release enables the unlocking of the guard locking function in the event of a fault
  • Three cable entries for flexible connection options
  • Latching cable gland 354000 for simple installation
  • Selection of ZB actuators suitable for any application

Accessories available as an option:
Override key lock, insertion funnel, bolt, screw connection and deadbolt.

Actuator for safety interlocks:
ZBG5M straight without rubber bushing (R ≥ 300mm)
ZBG5G straight with rubber bushing (R ≥ 300mm)
ZBA5G angled with rubber bushing (R ≥ 300mm)
ZBG5GE straight with rubber bushing (with insertion funnel, overrun 5 mm)
ZBA5GE angled with rubber bushing (with insertion funnel, overrun 5 mm)

Hinged actuator for safety interlocks:
ZBU5M hinged actuator, approach direction top / bottom (R ≥ 200mm)
ZBL5M hinged actuator, approach direction left / right (R ≥ 100mm)
ZBU5ME hinged actuator, approach direction top / bottom (with insertion funnel, overrun 5 mm, R ≥ 200mm)
ZBL5ME hinged actuator, approach direction left / right (with insertion funnel, overrun 5 mm, R ≥ 100mm)

Safety interlock ZD has a slim design similar to that of the ZS series. The double actuator head enables the simultaneous interlocking of two guards with a constant locking force.

View my requests
  Download all

Technical drawing

1/3
ZD-01
Full screen
1/3
2/3
ZD-02
Full screen
2/3
3/3
ZD_electrical_drawing
Full screen
3/3

Article characteristics

  • ZDA1121R
  • ZDA1220R
  • ZDR1121R
  • ZDR1220R
  • Min. switching voltage
  • Min. switching voltage
  • Min. switching current
  • Conv. thermal continuous current Ith
  • Utilization category
  • Rated insulation voltage (Ui)
  • Rated impulse withstand voltage (Uimp)
  • Magnet operating voltage +10%/-15%
  • Power consumption
  • Power-on time ED
  • Open-circuit principle
  • Closed-circuit principle
  • Switching principle
  • Short-circuit protection in accordance with IEC 60269-1 (fuse)
  • Conditional short circuit current
  • Pollution degree
  • B10d acc. to EN ISO 13849-1
  • Type acc. to EN ISO 14119
  • Mission time in years
  • Service life, mechanical (Cycles)
  • Dimensions
  • Emergency release present
  • Auxiliary unlocking device present
  • Emergency unblocking present
  • Locking force Fmax
  • Locking force FzH
  • Immersion depth
  • Overrun max.
  • Number of N.C. door position
  • Number of N.O. door position
  • Number of interlocks guard locking
  • Number of N.O. guard locking
  • Number of interlocks door position
  • Operating speed max.
  • Actuation frequency
  • Actuation force/attraction force/retention force
  • Housing material
  • Housing colour
  • Contact material
  • Protection class
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Mounting type
  • Weight
  • Installation
  • Connection type
  • Min. connection cross section
  • Max. connection cross section
  • Certified in accordance with
  • CE label
AttributeZDA1121RZDA1220RZDR1121RZDR1220R
Bestellung
Bestellung
Min. switching voltage 24 V DC
Min. switching voltage 24 V AC
Min. switching current 1 A
Conv. thermal continuous current Ith 4 A
Utilization category AC-15 4A 230V / DC-13 4A 24V
Rated insulation voltage (Ui) 250 V
Rated impulse withstand voltage (Uimp) 2500 V
Magnet operating voltage +10%/-15% 24 V AC/DC
Power consumption 8 W
Power-on time ED 100 %
Open-circuit principle yes –
Closed-circuit principle – yes
Switching principle Slow-action switch
Short-circuit protection in accordance with IEC 60269-1 (fuse) 4 A gG
Conditional short circuit current 100 A
Pollution degree 3
B10d acc. to EN ISO 13849-1 5000000
Type acc. to EN ISO 14119 2
Mission time in years 20 a
Service life, mechanical (Cycles) 1 x 10^6
Dimensions 42 x 81 x 228 mm (H/B/T)
Emergency release present no
Auxiliary unlocking device present yes
Emergency unblocking present no
Locking force Fmax 2500 N
Locking force FzH 2000 N
Immersion depth 24.5 mm
Overrun max. 5 mm
Number of N.C. door position 1 0 1 0
Number of N.O. door position 1
Number of interlocks guard locking 2
Number of N.O. guard locking 0 1 0 1
Number of interlocks door position 0
Operating speed max. 20 m/min
Actuation frequency 1200 1/h
Actuation force/attraction force/retention force 35 / 30 / 20 N
Housing material Glasfaserverstaerkter Thermoplast
Housing colour Gehaeuse schwarz / Deckel gelb
Contact material Silberlegierung hauchvergoldet
Protection class IP67 DIN EN 60529
Operating temperature min. -20 °C
Max. operating temperature 50 °C
Min. storage temperature -20 °C
Max. storage temperature 50 °C
Mounting type screwed
Weight 500 g
Installation arbitrary
Connection type 3 x M20 x 1,5 Kabelverschraubung
Min. connection cross section 0.34 mm²
Max. connection cross section 1.5 mm²
Certified in accordance with EN ISO 60947-5-1 GS-ET-19 UL 508 / CSA 22.2
CE label yes
1/1
ZD_ordering_key
Full screen
1/1
Operating instructions and product information
Manual solenoid interlock ZD pdf 1.66 MB

Download

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.

All entries marked with a * are mandatory.

Customer reviews

Similar products

  • Availabe in elostore
    Safety interlock ZM

    Safety interlock ZM

    • compact design
    • locking force up to 2000 N
    View
    Availabe in elostore
    Safety interlock ZS

    Safety interlock ZS

    • slim design
    • locking force up to 2500 N
    View

We focus on public welfare economics and recycling management

Sustainability at Elobau

en

Registration in 2 steps

1. Fill in the fields and submit the form to receive a confirmation email.
2. Click on the link in the confirmation email. You will only receive the elobau newsletter with this confirmation.

Your consent can be revoked at any time, e.g. within the footer of the newsletter.


I am interested in the following newsletter:

Product has been added to watchlist.

Change to watchlist
Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.

SPS 2024 – Smart Production Solutions

00
Days 00
Hours 00
minutes 00
Seconds