Skip to content
Climate neutral since 2010

CAN angle sensor 424C

Availabe in elostore

CAN angle sensor 424C

Availabe in elostore
  • Long lifetime and extremely reliable from contactless measurement with Hall principle
  • Angle measuring range up to 360°
  • IP67 protection class for harsh environmental condi­tions
  • Temperature range 40 °C to +85 °C
  • CAN bus connection (ISO 11898)
  • Protocols CANopen and SAE J1939
  • Optionally with operating lever
  • Connection with Deutsch DT06-6S connector

The 360° angle sensor 424C is used for angle measurements from 20° to 360° and is based on the contactless Hall measurement principle. It is extremely reliable and ensures a long service life. Due to the ball bearing, the pivot axis can absorb smaller radial forces and is therefore suitable for many applications in automation and vehicle construction where rotary movements of an axis must be detected.

This product is also available in the elo.store.

Technical drawing

1/1
424C_360_technical_dr_01
Full screen
1/1

Article characteristics

  • 424CJ360
  • 424CO360
  • Polarity reversal protection
  • Resolution
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Temperature coefficient
  • Linearity error
  • Signal sequence
  • Signal update rate
  • Outputs (quantity, type)
  • Technology
  • Angle measuring range
  • Fieldbus system
  • Protocol
  • Node ID / Source Address
  • Transmitting cycle
  • Baud rate
  • Bus terminating resistor
  • Outputs
  • MTTF
  • EMC Agricultural and forestry machines (Norm)
  • EMC Earth-moving and building construction machinery (Norm)
  • EMC Industrial trucks (Norm)
  • Max. shaft load, axial
  • Max. shaft load, radial
  • Mechanical stop
  • Actuating lever
  • Protection class
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Torque for fastening screws
  • Connector type
Attribute424CJ360424CO360
Bestellung
Bestellung
Polarity reversal protection yes
Resolution 0.1 °
Operating voltage min. 9 V DC
Operating voltage max. 32 V DC
Current consumption 70 mA
Temperature coefficient 5.6 ppm/K
Linearity error < +- 1 %
Signal sequence CW/CCW
Signal update rate 10 Hz
Outputs (quantity, type) 1
Technology Hall
Angle measuring range 360 °
Fieldbus system CAN
Protocol J1939 CANopen
Node ID / Source Address 0x15 0x02
Transmitting cycle 100 ms
Baud rate 250 kBit/s
Bus terminating resistor no
Outputs CAN J1939 CANopen
MTTF 49.3 a
EMC Agricultural and forestry machines (Norm) EN ISO 14982
pulse 5b: max. voltage 56V (absolute), functional status C for pulse 1 and 4
EMC Earth-moving and building construction machinery (Norm) DIN EN ISO 13766-1
pulse "load dump": max. voltage 56V (absolute)
EMC Industrial trucks (Norm) DIN EN 12895
Max. shaft load, axial 50 N
Max. shaft load, radial 100 N
Mechanical stop no
Actuating lever Selectable
Protection class IP67 DIN EN 60529
Operating temperature min. -40 °C
Max. operating temperature 85 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
Torque for fastening screws 2.5 N m
Connector type Deutsch DT04-6P
1/1
424C_360_ordering_key
Full screen
1/1

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.

SPS 2024 – Smart Production Solutions

00
Days
00
Hours
00
minutes
00
Seconds