Skip to content
Climate neutral since 2010

Angle sensor 424D

Availabe in elostore

Angle sensor 424D

Availabe in elostore
  • Long lifetime and extremely reliable from contactless measurement with Hall principle
  • Angle measuring range between 20° and 360°
  • IP67 protection class for harsh environmental conditions
  • Temperature range -40 °C to +85 °C
  • Resolution 12 bit
  • Current or voltage output signal
  • Available with one or two outputs, PWM signal available on request

General information
The angle measuring range lies between 20° and 359°. The measuring principle is contactless,
based on a magnetic field rotating above the 2D Hall sensor. The system is short-circuit proof. There is no mechanical limit stop. Housing material: PBT.

The 360° angle sensor 424D is used for the detection of rotary movements from 20° to 360°. Angle sensor 424D is based on the contactless Hall measurement principle, which is extremely reliable and ensures a long service life.

Angle sensors are used, for example, in foot pedals for controlling mobile machinery or for position determination in cranes. Additionally, the 424D is ideal for use in excavators, robots or wind turbines thanks to its robust design.

This product is also available in the elo.store.

Technical drawing

1/2
424D_technical_dr_01
Full screen
1/2
2/2
424D_technical_dr_02
Full screen
2/2

Article characteristics

  • 424D.1...
  • 424D.7...
  • Polarity reversal protection
  • Output signal min.
  • Output signal max.
  • Output signal min.
  • Output signal max.
  • Output signal - centre position/zero position
  • Output signal - centre position/zero position
  • Resolution
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Load resistance min.
  • Load resistance max.
  • Linearity error
  • Signal sequence
  • Signal update rate
  • Outputs (quantity, type)
  • Technology
  • Angle measuring range
  • Outputs
  • MTTF
  • Temperature coefficient
  • EMC Agricultural and forestry machines (Norm)
  • EMC Earth-moving and building construction machinery (Norm)
  • EMC Industrial trucks (Norm)
  • Max. shaft load, axial
  • Max. shaft load, radial
  • Mechanical stop
  • Actuating lever
  • Protection class
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Torque for fastening screws
  • Connector type
Attribute424D.1...424D.7...
Bestellung
Bestellung
Polarity reversal protection yes
Output signal min. 0.5 V DC
Output signal max. 4.5 V DC
Output signal min. 4 mA
Output signal max. 20 mA
Output signal - centre position/zero position 2.5 V DC
Output signal - centre position/zero position 12 mA
Resolution 0.09 °
Operating voltage min. 10 V DC
Operating voltage max. 30 V DC
Current consumption 30 mA
Load resistance min. 100000 Ohm
Load resistance max. 200 Ohm
Linearity error < ±1 % < ± 1 %
Signal sequence CCW or CW/CCW
Signal update rate 1600 Hz
Outputs (quantity, type) 1 or 2
Technology Hall
Angle measuring range 20°...360 °
Outputs 4...20mA 0,5...4,5V
MTTF 79.6 a 115.9 a
Temperature coefficient < ±1.2 %
EMC Agricultural and forestry machines (Norm) EN ISO 14982
pulse 5b: max. voltage 35V (absolute), functional status C for pulse 1 and 4
EMC Earth-moving and building construction machinery (Norm) DIN EN ISO 13766-1
pulse "load dump": max. voltage 35V (absolute)
EMC Industrial trucks (Norm) DIN EN 12895
Max. shaft load, axial 50 N
Max. shaft load, radial 100 N
Mechanical stop no
Actuating lever Selectable
Protection class IP67 DIN EN 60529
Operating temperature min. -40 °C
Max. operating temperature 85 °C
Min. storage temperature -40 °C
Max. storage temperature 85 °C
Torque for fastening screws 2.5 N m
Connector type Deutsch DT04-6P
1/1
Angle sensor 424D | Current or voltage output signal | elobau
Full screen
1/1

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.

SPS 2024 – Smart Production Solutions

00
Days
00
Hours
00
minutes
00
Seconds