Skip to content
Climate neutral since 2010

Safety relay 46212

Availabe in elostore
Rate this product

Safety relay 46212

Availabe in elostore
Rate this product
  • PLe/SIL3/Cat.4
  • Supply voltage 24V AC and DC
  • Connection for 4 sensors normally open/ normally closed
  • Monitoring of connected contactors (EDM)
  • Very compact design
  • 1 relay safety output potential-free SIL3/PLe/Kat.4
  • 1 control output changeover contact potential-free
  • LEDs for status and error indication

The compact design of the 4621273E safety evaluation unit allows it to be used even in applications with limited space.

A potential-free safety output in SIL3/PLe up to 4A and a control output with change-over contacts up to 3A are available. A maximum of 4 sensors with normally open/ normally closed contacts can be connected. Input expansion units (interfaces) can’t be used. Due to the 24V AC and DC supply voltage, the unit can be used for a wide range of applications.

The 4621273E can be used as a pin-compatible replacement for

462121E1
462121E1U (Note: different operating time)
462121E101
462121E1U1 (Note: different operating time)
462121E104
462124E1 (Note: different operating voltage AC 230 V)
462124E1U (Note: different operating voltage AC 230 V and different operating time)
462121H1
462121H1U (Note: different operating time)
462121H5
462121H5U (Note: different operating time)

Circuit examples are available on request from elobau.

View my requests
 Buy variants  Download all

This product is also available in the elo.store.

Technical drawing

1/2
Cat_MS_SAE_4621273E_DRW_opt
Full screen
1/2
2/2
Cat_MS_SAE_4621273E_CD_opt
Full screen
2/2

Article characteristics

  • 4621273E
  • Max. switching voltage at safety output
  • Max. switching voltage at control output
  • Max. switching voltage at safety output
  • Max. switching voltage at control output
  • Max. switching current at safety output
  • Max. switching current at control output
  • Max. switching power at safety output
  • Max. switching power at control output
  • Max. switching power at safety output
  • Max. switching power at control output
  • Number of relay safety outputs
  • Number of relay control outputs
  • Number of redundant safety inputs
  • Stop category 0 (STO) nach IEC 61800-5-2
  • Stop category 1 (SS1) nach IEC 61800-5-2
  • EDM/start input
  • Start function
  • Utilization category
  • Operating voltage min.
  • Operating voltage max.
  • Operating voltage min.
  • Operating voltage max.
  • Current consumption
  • Power consumption
  • Cross-short detection
  • LED display
  • Operating time
  • Min. switching voltage at safety output
  • Min. switching voltage at safety output
  • Min. switching current at safety output
  • Min. switching power at safety output
  • Min. switching power at safety output
  • Turn-on delay (ton)
  • Turn-off delay (toff)
  • Max no operating cycles at 0.5A switching current (ohmic load)
  • Max no operating cycles at 3A switching current (ohmic load)
  • Overvoltage category
  • Fuse operating voltage
  • Fuse safety output
  • Internal electronic fuse
  • Contact form
  • Power consumption
  • PL acc. to EN ISO 13849-1
  • SIL acc. to IEC 61508
  • SIL CL acc. to IEC 62061
  • PFHD according to IEC 61508
  • Category acc. to EN ISO 13849-1
  • Mission time in years
  • Hardware fault tolerance (HFT) according to IEC 61508
  • Dimensions
  • Housing material
  • Housing colour
  • Protection class
  • Protection class, installation space
  • Operating temperature min.
  • Max. operating temperature
  • Min. storage temperature
  • Max. storage temperature
  • Shock resistance (Norm)
  • Continuous shock resistance (Norm)
  • Vibration resistance (Norm)
  • Relative humidity
  • Air pressure
  • Delta tmax
  • Mounting type
  • Weight
  • Installation
  • Spring-type terminals
  • Pluggable connection terminals
  • Min. connection cross section
  • Max. connection cross section
  • Certified in accordance with
  • CE label
Attribute4621273E
Bestellung
Bestellung
Max. switching voltage at safety output 30 V DC
Max. switching voltage at control output 30 V DC
Max. switching voltage at safety output 250 V AC
Max. switching voltage at control output 250 V AC
Max. switching current at safety output 4 A
Max. switching current at control output 3 A
Max. switching power at safety output 120 W
Max. switching power at control output 90 W
Max. switching power at safety output 1000 VA
Max. switching power at control output 750 VA
Number of relay safety outputs 1
Number of relay control outputs 1
Number of redundant safety inputs 4
Stop category 0 (STO) nach IEC 61800-5-2 yes
Stop category 1 (SS1) nach IEC 61800-5-2 no
EDM/start input yes
Start function automatic
Utilization category AC-15 / DC-13
Operating voltage min. 21.6 V DC
Operating voltage max. 26.4 V DC
Operating voltage min. 21.6 V AC
Operating voltage max. 26.4 V AC
Current consumption 200 mA
Power consumption 5.28 W
Cross-short detection yes
LED display Yes
Operating time 10000 ms
Min. switching voltage at safety output 10 V DC
Min. switching voltage at safety output 10 V AC
Min. switching current at safety output 0.01 A
Min. switching power at safety output 0.1 W
Min. switching power at safety output 0.1 VA
Turn-on delay (ton) 100 ms
Turn-off delay (toff) 50 ms
Max no operating cycles at 0.5A switching current (ohmic load) 370000
Max no operating cycles at 3A switching current (ohmic load) 180000
Overvoltage category III
Fuse operating voltage 1A fast
Fuse safety output 4A slow blow
Internal electronic fuse no
Contact form NO/NC
Power consumption 5.28 VA
PL acc. to EN ISO 13849-1 e
SIL acc. to IEC 61508 3
SIL CL acc. to IEC 62061 3
PFHD according to IEC 61508 5,77 x 10^-10 1/h
Category acc. to EN ISO 13849-1 4
Mission time in years 20 a
Hardware fault tolerance (HFT) according to IEC 61508 1
Dimensions 75 x 47 x 92 mm (H/B/T)
Housing material PBT GF30
Housing colour schwarz
Protection class IP20 DIN EN 60529
Protection class, installation space IP54 DIN EN 60529
Operating temperature min. 0 °C
Max. operating temperature 55 °C
Min. storage temperature -25 °C
Max. storage temperature 70 °C
Shock resistance (Norm) 30 g / 11 ms
Continuous shock resistance (Norm) 10 g / 16 ms
Vibration resistance (Norm) 10...55 Hz; 0.5mm; 5g
Relative humidity 5 - 85 %
Air pressure 860 - 1060 hPa
Delta tmax 0.5 °C/min
Mounting type Mounting rail
Weight 250 g
Installation arbitrary
Spring-type terminals yes
Pluggable connection terminals no
Min. connection cross section 0.14 mm²
Max. connection cross section 2.5 mm²
Certified in accordance with EN ISO 13849-1 IEC 61508 IEC 62061 UL 508
CE label yes

Variants in elostore

Operating instructions and product information
Manual safety evaluation unit 4621273E pdf 2.31 MB
Evaluation unit 4621273 - Certificate TÜV Nord pdf 542.96 KB
Evaluation unit 4621273 - Certificate UL pdf 368.72 KB

Download

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.

All entries marked with a * are mandatory.

Suitable system components

  • Availabe in elostore
    Safety sensor eloProtect E 153ESK

    Safety sensor eloProtect M 153MSK

    • 6 x 26 x 13 mm
    • variable actuation
    • optional LED
    View
    Availabe in elostore
    Safety sensor eloProtect E 165ESK

    Safety sensor eloProtect M 165MSK

    • 88 x 25 x 13 mm
    • variable actuation
    • optional with LED and control contact
    View

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

en

Registration in 2 steps

1. Fill in the fields and submit the form to receive a confirmation email.
2. Click on the link in the confirmation email. You will only receive the elobau newsletter with this confirmation.

Your consent can be revoked at any time, e.g. within the footer of the newsletter.


I am interested in the following newsletter:

Product has been added to watchlist.

Change to watchlist
Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.

SPS 2024 – Smart Production Solutions

00
Days 00
Hours 00
minutes 00
Seconds