Skip to content
Climate neutral since 2010

Tilt sensor N7 dynamic CAN

Availabe in elostore

Tilt sensor N7 dynamic CAN

Availabe in elostore
  • High precision, even with fast movements, strong vibrations and shocks
  • Inertial Measurement Unit (IMU)
  • Output of acceleration, rotation rate and inclination
  • Precise signals for dynamic movements thanks to sensor fusion
  • EMC standards in accordance with off-highway standards (EN ISO 14982; DIN EN ISO 13766-1; DIN EN 12895)
  • Robust design for a long service life: protection class IP6K7 (ISO 20653) / IP6K9K (ISO 20653)
  • Temperature-resistant from -20 °C to +85 °C (-40 °C to +85 °C on request)
  • Connector types: Deutsch DT04-08PA, 1x M12 5-pin (male) or 2x M12 5-pin (male/female)
  • Daisy-Chain – Looping through the CAN signal without additional T-distributors
  • Fast installation thanks to efficient 2-point mounting
  • Smart variant management thanks to a clever modular system
  • E1 type approval for road approval
  • Parameter sets customised to the application to increase performance/accuracy (on request)

The N7 dynamic tilt sensor is available in CANopen or SAE J1939 versions. Due to its robust design and high resistance to shock and vibration, it is often used to measure inclination in construction machinery, agricultural machinery, industrial trucks and harsh industrial environments. Enhanced with a highly responsive blend of accelerometer and gyroscope, this combination effectively minimizes the impact of abrupt movements, guaranteeing the delivery of accurate measurement data.

N7 dynamic – developed for even greater safety, reliability, functionality and flexibility.

Ce produit est également disponible dans notre elo.store.

Technical drawing

1/4
Tilt sensor N7 dynamic CAN - elobau
Full screen
1/4
2/4
Tilt sensor N7 dynamic CAN - elobau
Full screen
2/4
3/4
Tilt sensor N7 dynamic CAN - elobau
Full screen
3/4
4/4
Tilt sensor N7 dynamic CAN - elobau
Full screen
4/4

Article characteristics

  • N7DCC000H2-001
  • N7DCC0D2H2-001
  • N7DCC0D2V2-001
  • N7DCC000V2-001
  • N7DCC001H2-001
  • N7DCC001V2-001
  • N7DCC002H2-001
  • N7DCC002V2-001
  • N7DCJ0D2H2-001
  • N7DCJ0D2V2-001
  • N7DCJ000H2-001
  • N7DCJ000V2-001
  • N7DCJ001H2-001
  • N7DCJ001V2-001
  • N7DCJ002H2-001
  • N7DCJ002V2-001
  • Technology
  • Supply voltage
  • Polarity reversal protection
  • Short-circuit protection
  • Current consumption
  • Output signal
  • Contact form
  • Protocol
  • UDS ISO 14229 capability
  • Baud rate
  • Cycle time
  • Node ID / Source Address
  • Bus terminating resistor
  • Connection type (switching output)
  • Switching points
  • Turn-on delay
  • Turn-off delay
  • Hysteresis
  • Max. switching voltage
  • Max. switching current
  • Max. switching power
  • Measuring range acceleration max.
  • Measuring range gyroscope max.
  • Resolution
  • Accuracy dynamically typ.
  • Repeating accuracy
  • Temperature coefficient
  • Sensing rate
  • Initialisation time after power on/start-up time
  • Installation
  • Zero justification
  • Number of measurement axes tilt
  • Measuring principle
  • Measuring range
  • NMT autostart
  • MTTF
  • Connector type
  • Weight
  • Housing material
  • Torque for fastening screws
  • Storage temperature
  • Protection class
  • Vibration resistance (Norm)
  • Shock resistance (Norm)
  • Operating temperature
  • Salt spray test
  • EMC Agricultural and forestry machines (Norm)
  • EMC Earth-moving and building construction machinery (Norm)
  • EMC Industrial trucks (Norm)
  • CE
  • E1 type approval
AttributeN7DCC000H2-001N7DCC0D2H2-001N7DCC0D2V2-001N7DCC000V2-001N7DCC001H2-001N7DCC001V2-001N7DCC002H2-001N7DCC002V2-001N7DCJ0D2H2-001N7DCJ0D2V2-001N7DCJ000H2-001N7DCJ000V2-001N7DCJ001H2-001N7DCJ001V2-001N7DCJ002H2-001N7DCJ002V2-001
Bestellung
Technology MEMS MEMS MEMS
Supply voltage +8..+36 V DC +8..+36 V DC +8..+36 V DC
Polarity reversal protection -36 V DC -36 V DC -36 V DC
Short-circuit protection ISO 16750-2 ISO 16750-2 ISO 16750-2
Current consumption < 100 mA < 100 mA < 100 mA
Output signal CANopen CANopen + 2x relay (NC) CANopen J1939 + 2x relay (NC) J1939
Contact form NC NC
Protocol CANopen CANopen J1939 J1939
UDS ISO 14229 capability yes yes yes
Baud rate 250 kBit/s 250 kBit/s 250 kBit/s
Cycle time 10 ms 10 ms 10 ms
Node ID / Source Address 32 32 226 226
Bus terminating resistor no no no
Connection type (switching output) Relay 1 = X1/X3 Y1/Y3 (Z1/Z3) / Relay 2 = X2/X4 Y2/Y4 (Z2/Z4) Relay 1 = X1/X3 Y1/Y3 (Z1/Z3) / Relay 2 = X2/X4 Y2/Y4 (Z2/Z4)
Switching points X1/X3 = 5
X2/X4 = 10
Y1/Y3 = 5
Y2/Y4 = 10 °
X1/X3 = 5
X2/X4 = 10
Z1/Z3 = 5
Z2/Z4 = 10 °
X1/X3 = 5
X2/X4 = 10
Y1/Y3 = 5
Y2/Y4 = 10 °
X1/X3 = 5
X2/X4 = 10
Z1/Z3 = 5
Z2/Z4 = 10 °
Turn-on delay 0s 0s
Turn-off delay 0s 0s
Hysteresis ±0,1° ±0,1°
Max. switching voltage 36 V DC 36 V DC
Max. switching current 1 A 1 A
Max. switching power 30 W 30 W
Measuring range acceleration max. ±8 g ±8 g ±8 g
Measuring range gyroscope max. ±250 °/s ±250 °/s ±250 °/s
Resolution 0,01 ° 0,01 ° 0,01 °
Accuracy dynamically typ. ±0,5 ° ±0,5 ° ±0,5 °
Repeating accuracy typ. ±0,2 ° typ. ±0,2 ° typ. ±0,2 °
Temperature coefficient max. ±0,015°/K max. ±0,015°/K max. ±0,015°/K
Sensing rate 100 Hz 100 Hz 100 Hz
Initialisation time after power on/start-up time 500 ms 500 ms 500 ms
Installation horizontal vertically horizontal vertically horizontal vertically horizontal vertically horizontal vertically horizontal vertically horizontal vertically
Zero justification ±60° ±60° ±60°
Number of measurement axes tilt 2 2 2
Measuring principle dynamic /(fast) moving applications) dynamic /(fast) moving applications) dynamic /(fast) moving applications)
Measuring range ±90° X-Achse
±180° Y-Achse
±90° X-Achse
±180° Z-Achse
±90° X-Achse
±180° Y-Achse
±90° X-Achse
±180° Z-Achse
±90° X-Achse
±180° Y-Achse
±90° X-Achse
±180° Z-Achse
±90° X-Achse
±180° Y-Achse
±90° X-Achse
±180° Z-Achse
±90° X-Achse
±180° Y-Achse
±90° X-Achse
±180° Z-Achse
±90° X-Achse
±180° Y-Achse
±90° X-Achse
±180° Z-Achse
±90° X-Achse
±180° Y-Achse
±90° X-Achse
±180° Z-Achse
NMT autostart not active not active not active
MTTF 92 a 92 a 92 a
Connector type 1xM12 5-polig (male) Deutsch DT04-08PA 1xM12 5-polig (male) 2xM12 5-polig (male/female) Deutsch DT04-08PA 1xM12 5-polig (male) 2xM12 5-polig (male/female) Deutsch DT04-08PA
Weight 113 g 108 g 113 g 123 g 108 g 180 g 113 g 123 g 108 g
Housing material PBT PBT PBT
Torque for fastening screws 10 Nm 10 Nm 10 Nm
Storage temperature -40..+85 °C -40..+85 °C -40..+85 °C
Protection class IP6K7 ISO 20653, IP6K9K ISO 20653 IP6K7 ISO 20653, IP6K9K ISO 20653 IP6K7 ISO 20653, IP6K9K ISO 20653
Vibration resistance (Norm) EN 60068-2-64 (random vibration 7,99g , 5-500Hz, 20,1mm displacement) EN 60068-2-64 (random vibration 7,99g , 5-500Hz, 20,1mm displacement) EN 60068-2-64 (random vibration 7,99g , 5-500Hz, 20,1mm displacement)
Shock resistance (Norm) EN 60068-2-27 (shock 51g, 11ms) EN 60068-2-27 (shock 51g, 11ms) EN 60068-2-27 (shock 51g, 11ms)
Operating temperature -20..+85 °C -20..+85 °C -20..+85 °C
Salt spray test DIN EN 60068-2-11 (salt spray mist for 96h at 35°C) DIN EN 60068-2-11 (salt spray mist for 96h at 35°C) DIN EN 60068-2-11 (salt spray mist for 96h at 35°C)
EMC Agricultural and forestry machines (Norm) EN ISO 14982, Load dump Pulse B with Us = 85V, Cranking ISO 16750-2 Level 1-4 EN ISO 14982, Load dump Pulse B with Us = 85V, Cranking ISO 16750-2 Level 1-4 EN ISO 14982, Load dump Pulse B with Us = 85V, Cranking ISO 16750-2 Level 1-4
EMC Earth-moving and building construction machinery (Norm) DIN EN ISO 13766-1, Load dump Pulse B with Us = 85V, Cranking ISO 16750-2 Level 1-4 DIN EN ISO 13766-1, Load dump Pulse B with Us = 85V, Cranking ISO 16750-2 Level 1-4 DIN EN ISO 13766-1, Load dump Pulse B with Us = 85V, Cranking ISO 16750-2 Level 1-4
EMC Industrial trucks (Norm) DIN EN 12895 DIN EN 12895 DIN EN 12895
CE yes yes yes
E1 type approval UN ECE Regulation No. 10 No. 10R06/01 9376 00 UN ECE Regulation No. 10 No. 10R06/01 9376 00 UN ECE Regulation No. 10 No. 10R06/01 9376 00
Downloads
Instruction manual N6/N7 Tilt sensor pdf 3.78 MB
Technical comparison tilt sensors pdf 60.87 KB
E1 Certificate German Kraftfahrt-Bundesamt pdf 539.38 KB
Flyer tilt sensors next generation pdf 751.53 KB

Customer reviews

We focus on public welfare economics and recycling management

Sustainability at Elobau

Product has been added to watchlist.

Data security and the limitation of data collection are very important to us. Further information on this can be found in our data privacy policy.

I agree that elobau GmbH & Co.KG and the subsidiaries group may contact me by e-mail or telephone. This can be revoked at any time by sending an e-mail message to datenschutz@elobau.de. The data provided are electronically transmitted by elobau GmbH & Co KG or to its subsidiaries, stored in the internal e-mail system and processed for offers and consultation. While the data may be stored by the provider under certain circumstances, it is handled in compliance with data protection regulations and subsequently deleted. Furthermore, the data remains with elobau group and is not disclosed to third parties, unless the inquiry is made from without the countries in which the companies are located, and disclosing the data to one of our trading partners is required in order to process the inquiry. I am aware that this may be a country outside the EU. I agree to this by the submission of this form.

The data sent will only be processed for the purpose of processing your inquiry. The data will be deleted as soon as it is no longer required for its original purpose. You can withdraw your consent at any time without providing a reason at: datenschutz@elobau.de. There are no adverse consequences. You have a right to information, deletion and restriction of the processing of your personal data.
Accept privacy policy
All entries marked with a * are mandatory.